Well, today was a bust. Only half the class showed, and since Chapter 4 is a pretty important chapter, I’ve postponed today’s class for next week. Make sure you’re here — we’re going forward next week, no questions asked.
Homework:
See yourself covering Unit 10 today. Imagine yourself imagining yourself being successful in all you do. And good things will come, grasshopper.
And they did, with Liz Heller. Liz came in after our unit and discussed with us the importance of our portfolios and resumes and cover letters (oh my!). We then took the rest of our class time and worked on the portfolios, resumes and cover letters of our own, which will be a major part of your grade in this class.
Homework:
I just realized it had been a while since I had blogged about something else other than specific classroom activities. I wish I could say that that was because I had been extremely busy, but that’s only half of the case. The other half is that I’m lazy.
Anyway, one of the topics in my Tuesday A+ class was configuring a router. We actually connected to the classroom router and had a look around. There were several instances where I said sentences that began with the words, “If this were a wireless router…”, so we had to use our imaginations a bit. So I decided that this blog provided a great opportunity to show you this configuration, step by step, if you were at all interested.
The first thing we need to do is actually find our router. Remember, the router is our gateway out of the network, so we need to find the address of our gateway. We can use a great little command-line tool called ipconfig to help us figure out what that address is. To get to the command prompt, we click Start > Run, and type cmd.
In the command prompt window, type ipconfig. This returns the following output, which is our networking configuration info:
The line we’re looking for is the router, or gateway, and we see this listed under Default Gateway. Its address, as you can see, is 192.168.15.1 Now, we simply take that address and type it into any web browser. After typing in our credentials (check your router’s documentation for more information), we are presented with this opening configuration screen:
Here, there are many things we can configure for our network, such as the router (Default Gateway)’s IP address, the range of IP addresses the router will assign, the name of the router, etc. But what we’re concerned about is making sure that our own computers are the only ones that will be able to access this router (no deadbeat neighbors, please!). So we will click on Wireless and be presented with this screen:
On this particular router, we can choose to broadcast in 802.11b or 802.11g or both (more on that later in class), and choose the SSID, or name, of the network. Mine is set now to Spolai105. But here, we want to go one step further in to the menu and click on Wireless Security:
Here we’re presented with a few options. First, the security mode can be basically one of two things: WEP or WPA. WEP is easily cracked, so I’d recommend choosing WPA, if at all possible. The thing is, my stupid wireless card won’t support WPA, so I’m stuck using the old school WEP. That’s ok though, because I really doubt that my elderly neighbors will be trying to hijack my Internet connection to send out porn spam. But, I’ve been wrong before.
Anyway, I’ve chosen WEP, and given some more blanks to fill in. The first is “passphrase”. I’ll type in a password here (by the way, this is not the real information on my router), halleberry and then click Generate. You’ll see that I’ll get four possible keys to choose from. I’ve chosen to make the router require the third key. If I were to click Save now, the router would reboot, and I’d have to type in the key in the configuration settings of any wireless device I want to connect to the router. That would be nice, but I’m not done yet.
I want to add yet another layer of protection to my router, just in case my key is cracked. I want to only allow certain MAC addresses on the router, which can be set to my personal computers. Anyone else who tried would be denied. Blam. I say that like it’s totally impossible to spoof a MAC address. It’s not. Regardless, I’ll click on Wireless MAC Filter and get this screen:
Here, I can choose to deny specific MAC addresses, or deny everyone except certain MAC addresses. I’m a paranoid delusional, so I’m going with the second choice. Then, I’m going to actually put those MAC addresses in the list:
Now, I can start typing in the names of MAC addresses I want to allow. How do we find out our MAC addresses, you ask? Great question.
We need to open back up the command prompt like we did before, and reissue the ipconfig command. This time, we need to add the /all switch to it, like this:
The physical address is another way of saying MAC address, and so we need to type in the physical address of our wireless card. If your computer has a wired network card and a wireless card, like mine, make sure you get the physical address of the wireless card. In this case, mine is 00-0E-35-E0-FD-54. Either typing it over, or marking and pasting it over, I can get this into the MAC Filter list (see above) and allow this particular MAC address have access to the router (and ulitimately, the Internet and any other computers allowed on the network.
Hopefully this has made the process of securing a wireless router a little less daunting. This is a necessary task, since the majority of consumer routers we see today are shipped with no security enabled. Too many people simply plug in their routers and go — leaving themselves exposed to evil elderly people with porn spam to send. Lock ‘em down, grasshoppers.
Tonight we heard from Scott Duvall, the systems administrator for Holland CPAs in Bowling Green. Scott shared some of his stories of implementing Exchange 2007 in his organization and various other aspects of his job.
Next week, we’ll pick up on Chapter Four, make sure you’re ready!!
Homework:
Today, Chapter 6 was covered, which was an introduction to networking. I like to call it “Net+ in a Day”. We covered a whole host of topics, including network topology, network cabling, network protocols, and then some popular command line tools in TCP/IP (like ping, arp, netstat, ipconfig, etc.)
Scott Duvall from Holland CPAs also dropped by to talk for a bit about various aspects of his career as a systems administrator. Scott spoke briefly about some of the projects he’s been involved in and shed some light on his philosophies regarding different aspects of his day to day activities. Interesting stuff.
Homework:
Tonight we conquered Unit 4, dealing with Uninteruptible Power Supplies, racks (nice rack! huh huh huh), and network cabling.
Homework:
Today we took a little break from the daily grind and instead fixed a computer for a friend of Ryan Wigginton in financial aid. He asked me to thank you guys for working on it.
Homework:
Today we did Units 7, 8, and 9, which dealt with our attitudes and how our beliefs make up our current reality. Remember, words turn into pictures, which turn into emotions. Emotions drive our decisions and therefore dictate our lives. Speak positive words to yourself! Our minds talk to us 6 times faster than other humans, so use that speed to your advantage!
Next week, Liz Heller from Career Services will be speaking to our class and helping us with resumes, portfolios and cover letters. After she’s finished, we’ll actually get started on them and get a running start for the end of the quarter due date.
Homework:
Chapter 3, pimps.
Homework:
Today we covered Chapters 4 and 5, which dealt with the I/O (input/output) system of our computers and mass storage in our computers.
Three things I’d like you to remember are IRQs, I/O Addresses, and DMA settings.
In Chapter 5, we talked about ways to store mass amounts of data, and typically this will mean the hard drive (although we did cover lots of other alternatives). Make sure you know your hard drive “geometry” and be able to identify what tracks, sectors, platters, and cylinders (we didn’t go over cylinders today — make sure you look over your notes from previous classes!)
I also introduced the idea of hard disk arrays, which are collections of hard disks designed to keep our data in one of several methods — each with their own benefits and drawbacks. Make sure you know the differences between RAID0, RAID1, and RAID5.
Homework:
